Electrician in Cameron Park, CA

Cameron Park grew from ranch land into a foothill community with its own residential airpark. We wire homes, garages, shops and outbuildings, and handle PG&E and the county permit.

  • CSLB #1050318
  • Permits handled
  • Upfront price first

Get a Free Estimate

Tell us about the job and we'll get back to you with a price.

By submitting, you agree to receive texts from us about your project.

CSLB #1050318Licensed & insured

Brands We Install & Trust

Panels, breakers, devices and chargers from the manufacturers Sacramento inspectors know.

  • Square D
  • Eaton
  • Siemens
  • Leviton
  • Schneider Electric
  • Tesla
  • Generac

Sagan Electric is a family-owned, licensed electrical contractor for Cameron Park homeowners and businesses. Panel upgrades, EV chargers, new circuits, repairs, lighting, and power run out to detached garages and workshops are the bulk of what we do here.

Cameron Park is a census-designated place, not a city. That means El Dorado County issues the permits and PG&E supplies the power, and we take care of the paperwork with both.

CSLB #1050318 PG&E territory County permits pulled for you Outbuilding & shop wiring

Getting a Cameron Park job approved and inspected

Homeowners sometimes call the wrong office first. Here's who actually does what for a Cameron Park address.

Permit: El Dorado County, not a city

With no city government, electrical permits go to the El Dorado County Building Division. Its permit applications ask for an electrical plan that shows outlets, switches, lights, smoke detectors and the main panel's size and location. We draw that up and submit it.

Utility: PG&E

For a service upgrade or a load-adding charger, we open a request in PG&E's "Your Projects" portal. PG&E may check its transformer and lines first, which can take a few weeks, then it sets up the disconnect and reconnect around install day.

Most small jobs, like swapping a fixture or replacing a worn outlet with the same thing, don't need either agency. We'll say so plainly when that's the case.

What's under the roof in Cameron Park

The community traces back to the 1950s, when Larry Cameron bought about 5,000 acres of foothill land for ranching and homes. It had 5,607 residents in 1980 and 18,881 in 2020, so a large share of the houses went up in the last forty-some years.

  • Earlier foothill homes. Houses from the community's first decades can have smaller panels and fewer grounded outlets than buyers expect. Grounding and GFCI updates are common first steps.
  • Growth-era neighborhoods. Homes from the 1980s onward often have a sound panel with little spare room. Adding a charger or a spa usually starts with a load calculation.
  • Cameron Airpark. This residential airpark dates to the 1960s. Residents taxi from backyard hangars to a 4,051-foot runway, and the streets double as taxiways. Hangars need lighting, outlets and sometimes compressor or tool circuits, fed from the house or a separate panel.
  • Remodels in established homes. When an older kitchen or bath gets opened up, it's the right time to add dedicated appliance circuits, GFCI and AFCI protection, and better lighting, since the walls are already open.

Electrical services for Cameron Park homes, shops and hangars

Our checklist for detached buildings

  • Wire size chosen for the actual distance, not just the breaker
  • A proper grounding setup at the outbuilding
  • A disconnect at the building so you can shut it off where you work
  • GFCI protection on shop and exterior outlets
  • County inspection passed before the trench is backfilled

Power for the garage, the shop or the hangar

A lot of Cameron Park projects aren't in the house at all. A detached garage gets turned into a workshop. An RV pad needs a hookup. A hangar needs light to work on a plane at night. These jobs have a few things in common: the run from the main panel can be long, voltage drop matters, and underground wiring gets inspected before the trench is covered. We figure out whether a single circuit is enough or whether a subpanel makes more sense, and we lay that out in a free estimate before any digging starts. If you're also thinking about a charger, it can often share the same feeder plan. Our page on additions and remodel wiring covers bigger conversions.

Out of Natomas, into the foothills

We're based in Natomas and also serve neighboring El Dorado Hills and Placerville. Office hours are Monday to Friday, 8 to 6.

Cameron Park electrician FAQ

Do I need a permit to run power to my detached shop?

Yes. New circuits and feeders to an outbuilding need an El Dorado County electrical permit and inspection. We pull it, and we schedule the trench inspection before backfill.

Is Cameron Park served by PG&E?

Yes. PG&E maintains the lines here; one PG&E outage that started near Cameron Park left nearly 4,000 El Dorado County customers in the dark. For panel upgrades that add load, PG&E reviews the request before it reconnects the new service.

Can my hangar or shop have its own panel?

Often, yes. A subpanel fed from your main service gives the building its own breakers and a local shutoff. Whether your main panel has room for it is the first thing we check.

Should I upgrade to 200 amps?

If you're adding a shop, charger and spa on top of a full house load, it's worth a look. If you're adding one of those, a load calculation may show you're fine as is.

How do estimates work?

They're free. We look at the job in person, then give you an upfront price. You decide before any work begins. Start on our contact page.

ZIP codes we serve in Cameron Park: 95682, 95762

5.0

out of 5 stars

300+ Happy Customers

Real reviews from homeowners and businesses across the Sacramento area.

Xishuo Lin

Xishuo Lin

Sep 2026

Laim had a really nice job done today for my Tesla charger!!

MELINDA TUCKER

MELINDA TUCKER

Sep 2026

This company was amazing! When I called, they answered, and tried to go over trouble shooting with me on the phone. When we were not able to fix the issue over the hone, they came out THE SAME DAY! Not only that, they helped me determine it must be the SMUD box and helped me call SMUD to get them out the SAME DAY too! 10/10

Robjob

Robjob

Sep 2026

Above and beyond help when my breaker panel needed replacing!

Derek Dolfie

Derek Dolfie

Aug 2026

Great service that was quick and easy. We have used Sagan a number of times for electrical work.

Claresse Anne Alvis

Claresse Anne Alvis

Aug 2026

The guys are early and on time. did a great job putting up our EV charger. very realiable and gives you proper instructions

Sunita Bhattarai

Sunita Bhattarai

Aug 2026

They were on time and got the job done perfectly !!

Anand Reddy

Anand Reddy

Aug 2026

Liam did a fantastic job! Arrived on time, efficiently installed and cleaned up. The quote was competitive and communication was great

Lisa Holbert

Lisa Holbert

Aug 2026

We use them all the time for our 5 rentals and they are awesome. Price is right, quality employees and quality work every time. Highly recommend!

Vincent Legaspi

Vincent Legaspi

Aug 2026

Wonderful experience. Liam and Daniel were fantastic, and easy to work with - from getting quotes all the way to project completion. Absolutely professional, gave courtesy updates, and worked with my schedule. Will recommend Sagan Electric to anyone needing electrical work done. As a homeowner, it’s been a struggle to find contractors who are professional, doesn’t pressure you, friendly, and are easy-going. Sagan Electric is that unicorn contractor. Highly recommend! Edit: Dana processed my permits and rebates, and she is phenomenal! Consistent updates, and very clear communication. From the installer all the way to the back office, Sagan has exceeded my expectations. Great company.

Cathia Sanchez

Cathia Sanchez

Aug 2026

Daniel from Sagan Electric gave me a fair quote for a ring camera and a Tesla charger. He educated me on my options and was patient with me throughout the process. Liam and Eric completed the installation. They asked about placement and provided recommendations.They were kind and made me feel comfortable. I am so happy with their work and highly recommend Sagan Electric.

Bob Kendall

Bob Kendall

Aug 2026

We had Sagan Electric install a wall charger for our Tesla, replace the electric panel in our 38 year old house, and take care of a few other misc electric issues. They were very pleasant to work with, stayed in good communication and showed up when they said they would. Their price was competitve and the were easy to work with for a couple of additional items. We were very happy with the interaction and would recommend them.

B

Bob K.

Aug 2026

We had Sagan Electric install a wall charger for our Tesla, replace the electric panel in our 38 year old house, and take care of a few other misc electric issues. They were very pleasant to work with, stayed in good communication and showed up when they said they would. Their price was competitve. We were very happy with the interaction and would recommend them.

Rated 5.0/5 from 300+ reviews

Need an Electrician in Cameron Park?

Schedule your free estimate with our licensed Sacramento electricians. You get a clear price before any work starts.

SMUD Participating Contractor
EPA
National Kitchen and Bath Association
National Association of Home Builders (NAHB)
BBB
Houzz